T-slot table is added above the rotary axes. So when you need to
engrave the cylinders, just unscrew and remove the T-slot table.
When you need to engrave the plane board or some other rare shaped
work piece, just put the rotary axes to the end side and install
the T-slot table. Combined two functions together, this machine is
1. Seamless steel lathe bed
2. Germany ball screw
3. Helical rack and pinion
4. Well compatibility: type 3, castmate, artcam, etc
5. Re-carving function after power failure
6. Stepper motors
7. Manual oil-injection system
8. DSP operating system
9. Gantry movement
10. High soft electric cables
11. French Schneider for small electric parts
12. Water-cooling system
13. Four rotary axes can work independently or synchronously
1. Timber/wood/foam/bamboo cylinders, etc.
2. Plane board and rare shaped work piece with material like
timber, MDF, plastics, soft metal, acrylic and so on.
Engraving, cutting, drilling, milling, enchase, relief, etc.
300mm for rotary axis
200mm for T-slot table
Adjustable 0-24,000 rpm
(X & Y Axes)
Helical Rack & Pinion
Germany ball Screw
Maximum Idling Speed
Custom sizes and upgrades for the components are available on
1. Weihong/Syntec controller
2. More or less rotary axis
3. Automatic oil-injection system
4. Different power requirements
5. Air-cooled system, etc.
Service & guarantee:
1. Technical supports and suggestions before you order a machine
according to your work piece.
2. Professional instruction for the operation of the machine
3. One year warranty, we will provide the consumable parts at cost
price after the warranty period. (We suggest you order a few extra
consumable parts together with the machine)
4. Our technician will come to your workshop if the problems can
not be fixed through Internet or phone communications.
5. 24-hour technical support by email or calling.
Mail: jeanhglory at gmail.com
gloryjeanhou at gmail.com